100 Gal Cap. OG Kelley & Co Stainless Steel Reactor
100 Gal Cap. OG Kelley & Co Stainless Steel Reactor Jacket: 50 PSI @550oF U69 Code ASME Serial #53584 304 Stainless Steel National Bd. #254 Shell 50 PSI –15-30 VAC Temp: 600oF Shell .125: HD: .187 Bottom Outer Head 3/16” Jacket Thickness 1/8” Unit sit on 4 pipe legs Top mounted 5 HP Dayton Motor Driven Agitator 208-230/460 Volts Motor 1755 RPM Connected to Gear Reduction Unit Unit has bottom center outlet approx. 1 ½” Unit measures approx 31” dam x 31” High OHM. 100” Built in 1953 Formerly used in ink production
1 - used 100 gallon Pfaudler Glass Lined Reactor. Built 1995. Rated 100 psi/FV internal @ 300 deg. F MAWP. -20 deg. F @ 100 psi MIN. Stainless steel jacket, pressure t.b.d. Unit is approx. 30 in. inside dia. x 32 in. straight side with dish bottom and approx. 10 in. center bottom outlet. Unit has a damaged spot which requires repair near the bottom outlet (approx. 4 in. x 3 1/2 in. area). Lug mounted. Dome top with 8 flanged inlets including 5 in. for agitator, (4) 3 in., (3) 4 in. National Board #48125. Serial number J001651. Driven by .5 HP/.373 kw Lightnin Vektor model V5S37 agitator. Vektor S/N 95/E35655. 230/460V. UL listed. Metallic shaft is approx. 1 in. dia. x 52 in. long with (3) pitched turbine blades & stabilizer ring (ground smooth welded) Approx. 8 in. blade span.
1 - used 300 gallon Pfaudler Glass Lined Reactor. Glass type #4025. Built in 1995 (repaired by Pfaudler in 2004). Rated 100 psi/FV internal @ 300 deg. F. Stainless steel (reported to be T-316) jacket rated 90 psi @ 300 deg. F. Vessel is approx. 43 3/4 in. ID x 38 1/2 in. straight side. Approx. 10 in. dia. center bottom outlet. Lug mounted with structural support. Serial #J001650. Pfaudler mfg. repair #J056567. Pressurized mechanical seal. National Board #48124. Dome top with misc. flanged inlets including 5 in. ID top center for agitator. Driven by .5 HP/.373 kw Lightnin Vektor model V5S37 agitator. Vektor S/N - 95/e35650. 230/460V. UL listed. Metallic shaft is approx. 1 1/4 in. dia. x 60 in. long with (3) pitched turbine blades & stabilizer ring (ground smooth welded). With approx. 4 in. dia. Fluid Flow Products electric/air solenoid top inlet valve.
1 - used approx. 65 gallon Northland Stainless, Inc. Reactor. Stainless steel construction (Reported to be T-316 stainless. Grade of stainless to be determined) Built in 1995. Rated 42.7 psi @ 176 deg. F internal Max. / -20 deg F @ 42.7 psi Min. Stainless steel jacket rated 14.3 psi @ 176 deg. F Max. / -20 deg. F @ 14.3 psi Min. National Board #1927. Manufacturer's serial number 957005. Shell & jacket thickness .165 in. Lug mounted with structural support (included). 3 in. center bottom outlet and approx. 2 1/2 in. bottom outlet. Stainless steel shaft with 3 pitched blades and stabilizer ring (inside vessel). .5 HP/UL listed, 230/460V Lightnin drive with pressurized mechanical seal. Bolted dome top with 6 in. flanged inlet for agitator. (1) 4 in. top inlet, (1) 5 in. sight glass with wiper, misc. other top inlets. Approx. 4 in. flanged air/electric valve.
